Home / Lock Brands / Securitron magnetic lock service

Lock brand service

Securitron Magnetic Lock Service in Charlotte

Securitron-class maglocks hold a door with an electromagnet and armature plate rather than a latch. They typically release when power is removed, so fire-alarm and request-to-exit wiring are part of the opening, not extras. We service them independently. Holding force numbers on a brochure never replace a listed egress plan. Also heard as Magnalock, electromagnetic lock, shear maglock. Charlotte Locksmith is a mobile, veteran-owned, bonded and insured locksmith. We write this from work on the actual opening, not from a catalog paragraph reused across a hundred URLs.

Call (704) 741-4490 Request a callback

Open 24 hours 4.9★ · 203 reviews Bonded & insured Veteran-owned

(704) 741-4490

Need securitron magnetic lock service?

Tell us about Securitron magnetic lock service at this opening. Firm price before any work.

Call (704) 741-4490

Pages that sit beside Securitron magnetic lock service, rather than generic blog roundups, include these Charlotte Locksmith resources: Access Control, Lock Brands, Lock Products, Residential Locksmith, Commercial Locksmith.

At Uptown glass tenant suite that added a maglock after hours, confirm swing versus slide That pairing exists on this page because Securitron magnetic lock service fails differently there than on a textbook slab.

Electromagnets instead of keepers

Technicians isolate magnet body and coil before they blame the rest of Securitron magnetic lock service. That isolation is how we avoid replacing a sound chassis to hide a frame problem. Photos for the occupant show that part in place rather than a stock image of hardware nobody has.

If armature plate and gender to the door is tired, the occupant feels it as a ‘bad lock.’ We name the part at the door so the recommendation matches the wear. Authorization still comes first when a key, code, or credential belongs to someone else.

On Securitron magnetic lock service, bond sensor or DPS on some models is checked as its own failure path, because treating the whole product as one object hides the part that actually stopped the door. We look at it with the door standing open, then again closed, because frame collision changes feel.

Technicians isolate filtered DC power sized for the coil current before they blame the rest of Securitron magnetic lock service. That isolation is how we avoid replacing a sound chassis to hide a frame problem. Photos for the occupant show that part in place rather than a stock image of hardware nobody has.

If REX motion or bar to shunt and release is tired, the occupant feels it as a ‘bad lock.’ We name the part at the door so the recommendation matches the wear. Authorization still comes first when a key, code, or credential belongs to someone else.

On Securitron magnetic lock service, optional shear geometry on sliding or vertical-lift doors is checked as its own failure path, because treating the whole product as one object hides the part that actually stopped the door. We look at it with the door standing open, then again closed, because frame collision changes feel.

Armature alignment on glass and aluminum

We see Uptown glass tenant suite that added a maglock after hours more often than trade magazines admit. The inspection sequence below is written around that opening. Maglocks want a door that presents the armature flat. A warped aluminum stile or a closer that slaps the plate sideways cooks misalignment into nuisance release. Frames must support the magnet weight; glass kits are their own hardware.

museum-style gallery in South End with a delayed-egress conversation teaches different habits than a showroom door. Hinges, weather, and who holds keys all change. Condensation on warehouse magnets in spring causes plates to freeze-film and report false bond. We dry and reset rather than turning amperage up as a habit.

A typical call looks like this: parking-garage stair that should never have been maglocked without listed release. The hardware conversation starts from that occupancy, not from a national template. If the door ‘pops’ then regrabs, look at the closer slam tearing the armature off face.

REX that actually drops the coil

When occupants describe armature that binders because the door dropped, we reproduce it with the door open and closed instead of guessing on the porch. Repair stays on the table when the coil is healthy, the plate is flat, and egress wiring still matches occupancy. Replacement enters when the magnet housing is cracked, residual magnetism is erratic, or the opening should have been an electric strike and exit device instead.

12/24 taps set wrongly shows up enough in this product family that we photograph it before we unbolt anything. Repair stays on the table when the coil is healthy, the plate is flat, and egress wiring still matches occupancy. Replacement enters when the magnet housing is cracked, residual magnetism is erratic, or the opening should have been an electric strike and exit device instead.

One of the honest symptoms is REX that does not actually interrupt lock power. That is not a personality trait of the lock; it is a path we test. Repair stays on the table when the coil is healthy, the plate is flat, and egress wiring still matches occupancy. Replacement enters when the magnet housing is cracked, residual magnetism is erratic, or the opening should have been an electric strike and exit device instead.

When occupants describe fire-alarm relay never landed, we reproduce it with the door open and closed instead of guessing on the porch. Repair stays on the table when the coil is healthy, the plate is flat, and egress wiring still matches occupancy. Replacement enters when the magnet housing is cracked, residual magnetism is erratic, or the opening should have been an electric strike and exit device instead.

Bond sensor that reports secure while the plate is peeling shows up enough in this product family that we photograph it before we unbolt anything. Repair stays on the table when the coil is healthy, the plate is flat, and egress wiring still matches occupancy. Replacement enters when the magnet housing is cracked, residual magnetism is erratic, or the opening should have been an electric strike and exit device instead.

One of the honest symptoms is sliding doors using a surface mag that was meant for a swing. That is not a personality trait of the lock; it is a path we test. Repair stays on the table when the coil is healthy, the plate is flat, and egress wiring still matches occupancy. Replacement enters when the magnet housing is cracked, residual magnetism is erratic, or the opening should have been an electric strike and exit device instead.

Fire-release wiring we will not skip

Inspection item 01: confirm swing versus slide.

Inspection item 02: read voltage and current at the magnet under hold.

Inspection item 03: test REX, mechanical exit, and fire interface in that order.

Inspection item 04: check armature to magnet face cleanliness.

Inspection item 05: look for unlisted delayed-egress claims.

Inspection item 06: measure residual gap after closer slam.

Maglocks want a door that presents the armature flat. A warped aluminum stile or a closer that slaps the plate sideways cooks misalignment into nuisance release. Frames must support the magnet weight; glass kits are their own hardware.

Armature that binders because the door dropped is one of the reasons people ask for Securitron magnetic lock service. Firm price before any work.

Call (704) 741-4490

Bond sensors that can lie

Ask how people leave
If the only release is a magnet, listed REX and fire release have to exist. We will not ‘just hang a magnet’ on a required exit. This is step 01 of Securitron magnetic lock service, written against armature that binders because the door dropped.
Present the armature
Plate height and filler washers are set so the faces meet square. This is step 02 of Securitron magnetic lock service, written against 12/24 taps set wrongly.
Land power and release circuits
Filtered DC, correctly tapped. REX and fire relays are tested, not assumed. This is step 03 of Securitron magnetic lock service, written against REX that does not actually interrupt lock power.
Prove hold and release
Granted hold, REX release, fire-alarm or simulated power cut. This is step 04 of Securitron magnetic lock service, written against fire-alarm relay never landed.

Shear versus surface bodies

Repair path

We keep existing hardware when the coil is healthy, the plate is flat, and egress wiring still matches occupancy. Keeping it still includes strike, hinge, and key-control work.

Replacement path

We recommend replacement when the magnet housing is cracked, residual magnetism is erratic, or the opening should have been an electric strike and exit device instead. The occupant hears both paths before a part is ordered.

If the only release is a magnet, listed REX and fire release have to exist. We will not ‘just hang a magnet’ on a required exit. That observation belongs in the repair-or-replace talk, not after the invoice.

Why a maglock is not a panic bar

Maglocks typically fail unlocked when power dies; battery backup can change that story and must be honest. That rule is applied here to Securitron magnetic lock service, particularly magnet body and coil.

Delayed egress is a code-specified product, not a timer we invent. That rule is applied here to Securitron magnetic lock service, particularly armature plate and gender to the door.

Independent, not Assa Abloy/Securitron corporate. That rule is applied here to Securitron magnetic lock service, particularly bond sensor or DPS on some models.

Condensation on warehouse faces

Condensation on warehouse magnets in spring causes plates to freeze-film and report false bond. We dry and reset rather than turning amperage up as a habit.

A South Tryon gallery maglock would not release from the interior PIR. The PIR saw the ceiling, not the approach. We relocated the REX, proved fire-relay release with the fire contractor present, and left the magnet as a hold device rather than a mystery.

Uptown glass tenant suite that added a maglock after hours is one working example; the same tape-and-authorization process travels to Matthews, Mint Hill, Huntersville, Pineville, Concord, Belmont, and Indian Trail when the opening is this securitron-maglock hardware. Mobile service, no public storefront address. (704) 741-4490.

Indian Trail Huntersville Pineville Matthews Cornelius Concord Belmont Mint Hill

Battery backup honesty

After service, watch this: If the door ‘pops’ then regrabs, look at the closer slam tearing the armature off face.

Skip these habits: Do not paint the magnet face. Do not jumper out REX because it ‘false trips’.

Written from Charlotte Locksmith practice on Securitron magnetic lock service, especially magnet body and coil. Open 24 hours is a staffing fact, not a pressure tactic. Bonded and insured. 4.9 from 203 reviews. (704) 741-4490.

Independent maglock work

Someone working Securitron magnetic lock service is accountable for magnet body and coil, then armature plate and gender to the door, then the strike and the door that carries both. That is a different job from swapping visible trim after armature that binders because the door dropped.

A South Tryon gallery maglock would not release from the interior PIR. We still start with a tape and confirm swing versus slide, not with a boxed SKU.

At Uptown glass tenant suite that added a maglock after hours, check armature to magnet face cleanliness That pairing exists on this page because Securitron magnetic lock service fails differently there than on a textbook slab.

At museum-style gallery in South End with a delayed-egress conversation, look for unlisted delayed-egress claims That pairing exists on this page because Securitron magnetic lock service fails differently there than on a textbook slab.

At parking-garage stair that should never have been maglocked without listed release, measure residual gap after closer slam That pairing exists on this page because Securitron magnetic lock service fails differently there than on a textbook slab.

Field note 01 on Securitron magnetic lock service: people often arrive already living with armature that binders because the door dropped. The first tape measure move is confirm swing versus slide, not a boxed replacement by default.

Field note 02 on Securitron magnetic lock service: people often arrive already living with 12/24 taps set wrongly. The first tape measure move is read voltage and current at the magnet under hold, not a boxed replacement by default.

Field note 03 on Securitron magnetic lock service: people often arrive already living with REX that does not actually interrupt lock power. The first tape measure move is test REX, mechanical exit, and fire interface in that order, not a boxed replacement by default.

Field note 04 on Securitron magnetic lock service: people often arrive already living with fire-alarm relay never landed. The first tape measure move is check armature to magnet face cleanliness, not a boxed replacement by default.

Field note 05 on Securitron magnetic lock service: people often arrive already living with bond sensor that reports secure while the plate is peeling. The first tape measure move is look for unlisted delayed-egress claims, not a boxed replacement by default.

Field note 06 on Securitron magnetic lock service: people often arrive already living with sliding doors using a surface mag that was meant for a swing. The first tape measure move is measure residual gap after closer slam, not a boxed replacement by default.

Questions we answer at the door

Does a maglock stay locked in a blackout?

Most surface maglocks release when power dies. If batteries hold the magnet, that has to be the specified design, not a surprise. On this opening that points at magnet body and coil.

Can you put one on a stair tower?

Only with listed egress release that the occupancy and AHJ accept. Many stairs belong on mechanical exit devices instead. On this opening that points at armature plate and gender to the door.

Is holding force the whole story?

No. Presentation of the armature, power quality, and release path matter more than a brochure pound-force. On this opening that points at bond sensor or DPS on some models.

Factory branch?

No. Independent locksmith. On this opening that points at filtered DC power sized for the coil current.

Do you install DPS too?

When the system needs door-position monitoring, we install and cable it as part of the opening. On this opening that points at REX motion or bar to shunt and release.

Cornelius offices?

Yes, maglock diagnosis in Cornelius, Charlotte, and nearby commercial sites. On this opening that points at optional shear geometry on sliding or vertical-lift doors.

Need this service?