Locksmith Services

Key Duplication Services in Charlotte, NC

Whether you need a spare key for your home, office, or vehicle, our precision key duplication services in Charlotte ensure you always have a working copy. We cut keys with exact specifications for smooth operation.

Call (704) 741-4490
Get in Touch
Our Duplication Services

Key Duplication Services: Key Points

Residential Keys

Standard house keys for Schlage, Kwikset, Yale, and more.

Commercial Keys

Do Not Duplicate and commercial profile keys.

High-Security Keys

Restricted and high-security key copying for authorized users.

Mailbox & Desk Keys

Small keys for mailboxes, file cabinets, and padlocks.

About Key Cutting

Precision Key Duplication & Cutting

Having spare keys is the easiest way to prevent lockouts. We offer standard key duplication, high-security key copying, and custom key cutting for residential and commercial properties.

We use calibrated key cutting machines to guarantee that your new keys work perfectly every time, preventing unnecessary wear on your locks.

When to Get Copies

Common Causes of Key Duplications

New House Member

Need a key for a new roommate, family member, or trusted neighbor.

Lost Your Spare

You lost your primary spare key and need a backup.

Worn Out Key

Your old key is worn down and becoming difficult to turn.

Office Expansion

New employees need access to the building or specific offices.

Prevent Lockouts

Keep a spare key hidden or with a friend to avoid lockout fees.

Provide Access to Guests

Give temporary access to dog walkers, cleaners, or contractors.

A Silca Futura Edge electronic key cutting machine duplicating a brass key in a locksmith workshop
Key Types

Keys We Duplicate

Accurate Cutting

We calibrate our cutting machines regularly for precision.

Wide Key Selection

We carry thousands of key blanks to match your lock perfectly.

Tested for Fit

We test copies if we are on-site to ensure smooth turning.

Panic Bar Exit Devices

Doors equipped with Von Duprin, Detex, or similar panic bar hardware are keyed from the outside with a conventional cylinder. The cylinder is picked the same way as a standard lock, though the door mechanism itself differs.

High-Security Office Cylinders

Medeco, Mul-T-Lock, and ASSA Abloy high-security cylinders with restricted keyways and pick-resistant pin configurations. These require specialized tools and additional time. We carry the necessary equipment for these systems.

Intercom & Access Control Systems

Multi-tenant buildings with intercom entry, proximity card readers, or key fob systems. We address the physical lock cylinder on your unit door even when the building entry system is managed separately by property management.

How It Works

The Key Duplication Services Process

1. Contact Us

Call or message us with your address and the lock type if you know it, so we arrive with the right tools for commercial hardware.

2. Authorization Check

We verify your identity and your right to access the property using photo ID and business or occupancy documentation.

3. Lock Assessment

The technician identifies the brand, cylinder type, and any visible damage, then selects the appropriate entry method.

Commercial Keys

Picking or bypass opens the door in most cases. Time varies from 10 minutes for a standard cylinder to longer for mortise or high-security locks.

5. Post-Entry Inspection

We check the lock mechanism and advise on rekeying or replacement if the lock is worn. Rekeying can be done before we leave.

For Office Managers

Prevention Tips

Designate a Key Custodian

Assign one primary key holder and one backup. Document who has copies of each key. For offices with more than a few employees, a master key system reduces the risk of being locked out due to a missing key.

Keep the Keypad Battery on a Schedule

Set a calendar reminder to replace keypad batteries every 12 months rather than waiting for a low-battery warning. Most commercial keypads take standard AA or 9-volt batteries that cost a few dollars.

Rekey When Staff Changes

Any time an employee with key access leaves the organization, have the lock rekeyed before the next business day. Rekeying a commercial lock changes the pin configuration so old keys no longer work.

Lubricate Cylinders Annually

Apply a small amount of dry graphite lubricant to the keyway of each lock once a year. This keeps pins and the plug operating smoothly and reduces the chance of a key breaking or the cylinder seizing.

Common Questions

Frequently Asked Questions

In most cases, no. Commercial lock picking and bypass methods open the door without any damage to the cylinder, door, or frame. Drilling is used only as a last resort when a cylinder is physically seized, severely corroded, or has a security configuration that cannot be picked with standard tools. When drilling is required, only the cylinder body is affected, and a replacement cylinder can be installed on the same visit to restore full function.

Standard keys take only a few minutes to cut. Transponder or high-security keys may take slightly longer, but most are completed within 10-15 minutes.

Yes, we calibrate our key-cutting machines regularly to ensure precision. If a key we cut doesn’t work smoothly, we will recut it or adjust it for free.

It depends on why you were locked out. If a key was lost, misplaced, or is in the hands of someone who should no longer have access, rekeying is the right next step. Rekeying changes the driver pin configuration inside the cylinder so existing keys no longer operate the lock. It does not require replacing the door hardware and can typically be done in ten to fifteen minutes on the same visit. If the lockout was simply due to keys being left inside and all key copies are accounted for, rekeying is not necessary.

Yes, in most cases. Electronic access control hardware such as Schlage NDE, Allegion, and similar systems generally include a physical key cylinder on the door as a backup entry method. We pick or use the key cylinder to open the door. If the electronic system itself needs to be reprogrammed or its battery replaced, we handle the physical cylinder portion and advise on who to contact for the electronic system management.

Commercial lockout pricing varies based on lock type, time of day, and location. Standard commercial cylindrical locks cost less to open than heavy-duty mortise locks or high-security cylinders. After-hours calls typically carry a higher service fee than daytime calls. We provide a written estimate before starting any work so there are no surprises on the invoice.

Explore More

Related Services

House Lockout Service

Locked out of your home? We handle all residential lock types including deadbolts, knob locks, mortise locks, and smart lock keypads.

Car Lockout Service

Locked out of your vehicle? We work with all car makes and models, from traditional key locks to modern key fob and push-button ignition systems.

Lock Rekey Service

Lost a key or need to revoke an employee's access? Rekeying changes the cylinder pin configuration so old keys no longer work, without replacing the door hardware.

We Are Here to Help

Locked Out of Your Office?

A licensed Charlotte locksmith can open your office door without damaging your lock hardware. Contact us to discuss your situation and get a written estimate before we dispatch.

(704) 741-4490

Call Now
Get in Touch

Professional locksmith services throughout Charlotte, NC and Mecklenburg County. Residential, commercial, and automotive lock solutions.

Licensed & Insured

Contact Us

Hours
Wednesday: Open 24 hours
Thursday: Open 24 hours
Friday: Open 24 hours
Saturday: Open 24 hours
Sunday: Open 24 hours
Monday: Open 24 hours
Tuesday: Open 24 hours
Location
Charlotte, NC
Mecklenburg County
Send a Message

© 2025 Charlotte Locksmith. All rights reserved.